Mounting Instruction - R82 Gazelle PS Instructions De Montage

Mounting instruction

Mounting tray with bowl - 1/3
The tray can be mounted in 4 positions - prone low, prone high, supine low and
supine high.
At mounting use the enclosed 5 mm Allen key.
* The handles (A) are loosened completely, and the tray bracket (B) is placed in
the two tubes (C) on the back of Gazelle PS. Fasten the handles (A) again. Al-
ways place the tray bracket in a position where the long ends on the horizontal
tubes (D) turn towards the user.
* The bolts (E) are loosened in both sides, the tray bars are put in position for prone
or supine mounting as shown on drawings below. The bolts (E) are fastened
loosely.
* Handles (F) on both sides are loosened, the tray bars are mounted in the ho-
rizontal tubes and handles (F) are fastened again. The bolts (E) are fastened
completely with Allen key when the desired position has been achieved.
* Loosen handles (A) to adjust the height of the tray. Loosen handle (G) to adjust
the angle of the tray (the handle (G) should never be removed completely as
the parts can be hard to assemble again).
PRONE
E
B
SUPINE
E
D
F
G
C
A