Removal Of Spreader Bar/Cradle Systems - Joerns Healthcare Oxford Stature Manuel De L'utilisateur Et Garantie

Oxford
®
E ngli sh
Stature

6. Removal of Spreader Bar/Cradle Systems

FOLLOW THESE INSTRUCTIONS EXACTLY
Your Stature lift has the option of using both a 6 point spreader bar and 4 point positioning cradle.
The removal of either of these systems is completed easily by the use of a quick-release pin.
This is done quickly and easily, but you must read the following safety instructions to ensure the
spreader bar/cradle is safely locked into position before use.
CONNECTION
To connect, raise the spreader bar/cradle up toward the boom slot.
Insert the pin sleeve through the plastic end cap and to support the spreader bar/cradle.
Once aligned in the boom slot reinsert the quick release pin fully into the sleeve until it locks into
position. YOU MUST CHECK THAT THE PIN IS SECURELY FITTED.
To do this, press your finger into the barbed end. If the pin remains stationary the lift is safe to use.
15
294000.10017 Rev. C