Cleaning And Maintenance - Waeco CDF18 Manuel D'utilisation

CoolFreeze
6.8 Replacing the light bulb (CDF25 only)
➤ Press the switch pin (fig. 7 2, page 3) downwards so that the
transparent part (fig. 7 1, page 3) of the lamp can be removed
at the front.
➤ Replace the light bulb.
➤ Press the lamp back into the housing.
7

Cleaning and maintenance

WARNING!
!
Always disconnect the device from the mains before you clean and
service it.
NOTICE! Risk of damage
A
 Never clean the cooler under running water or in dish water.
 Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp
cloth.
8 Guarantee
The statutory warranty period applies. If the product is defective,
please contact the manufacturer's branch in your country (see the
back of the instruction manual for the addresses) or your retailer.
For repair and guarantee processing, please include the following
documents when you send in the device:
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
EN
Cleaning and maintenance
27