Before Initial Use; Energy Saving Tips; Connecting The Cooler - Waeco CDF18 Manuel D'utilisation

CoolFreeze
6 Operation
6.1

Before initial use

NOTE
I
Before starting your new cooler for the first time, you should clean
it inside and outside with a damp cloth for hygienic reasons (please
also refer to the "Cleaning and maintenance" on page 27).
6.2

Energy saving tips

 Choose a well ventilated installation location which is protected
against direct sunlight.
 Allow warm food to cool down first before placing it in the device
to keep cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooler unit open for longer than necessary.
 Defrost the cooler once a layer of ice forms.
 Avoid unnecessary low temperatures.
6.3

Connecting the cooler

The cooler can be operated with 12 V or 24 V DC.
NOTICE! Danger of damaging the device!
A
Disconnect the cooler and other consumer units from the battery
before you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
For safety reasons the cooler is equipped with an electronic system
to prevent the polarity reversal. This protects the cooler against
short-circuiting when connecting to a battery.
➤ Plug the 12/24-V connection cable (fig. 1 2, page 2) into the
DC voltage socket and also into the cigarette lighter or a 12 V
or 24 V socket.
EN
Operation
23