MITACA i5 Instructions D'utilisation page 26

Programming dispensing
• To programme the machine contact the dealer
HINT:
• To prepare cappuccino, hot milk, tea or a long espresso,
close the small cup support (10) and use a large cup.
To prepare an espresso coffee correctly, lower the small
cup support (10) and use an espresso cup (Fig. 11)
Preparation of coffee/tea/beverages
• Use only capsules specifically intended for this model
• Place the cup under the coffee dispensing spout.
• Lift the control lever (1) slowly backwards until it stops
and insert a capsule in the space provided (Fig. 12)
• Close the lever (1) completely and press one of the
dispensing buttons:
small coffee (E), long coffee (D), macchiato (C), cappuccino
(B) (Fig. 13)
• Dispensing is indicated on the display. Dispensing stops
automatically. Press the selected key to stop dispensing
early.
N.B.
• Check regularly that there is sufficient powdered milk in
the container.
N.B.
• Dispensing stops automatically. If you
want to interrupt dispensing earlier, press
the selected button again.
• To extract the capsule, slowly lift the lever
(1).
If the capsule is not ejected, repeat the
operation or press one of the dispensing
buttons and lift the lever (1) at the same
time.
HINT:
•To prepare a good espresso use thick
cups, possibly preheated, so that the coffee
will not cool too quickly.
Fig. 11
1
Fig. 13
24
1
Fig. 12
10
B.
C.
D.
E.