Preparation Of Coffee - Ascaso DREAM Mode D'emploi

Masquer les pouces Voir aussi pour DREAM:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
1. Connect the coffee machine with
1
switch 0/1
.
2. Put the filter holder
coffee into position and a recipient
below.
3. Turn on the coffee switch
run approximately half a reservoir.
Attention! Check that the reservoir
has water enough. If the coffee
machine is used without water, the
pump may be damaged.
B) PRIMING
Change the water in the boiler and
circuit.
• If coffee does not come out,
when the machine has not
been used for some time.
• lAfter producing steam
• lIf there is no water in the
reservoir, the following
procedure should be
performed:
1. Turn on the steam tap
coffee machine switched on.
2. Turn on the coffee switch
allow the water to come out (one
cup) through the steam tube
3. Switch off the coffee function
and turn off the steam tap
4. The coffee machine is now ready
for use.
C)After steam has been produced,
it is very important to wait for the
6
pilot light
to light again, either
to go out or to perform priming.
IMPORTANT! Before to make a
cappuccino, keep the filterholder
from the group head.
FIXED FILTER HOLDER SYSTEM
Step A is unnecessary. Step B and C
are necessaries.
If using ground coffee:
Fill the filter up to the rim (see picture
7
without
2B). Tamp and fill again.
4.
2
and
Any type of coffee may be used,
ground or pod, thanks to the 5 filters
supplied: 2 ground filters (1- and
2-cup), 2 pressurised filters (1- and
2-cup Cream+) and 1 pod filter.
For optimal results, we advise using
ready mixes for espressos, as they
have the appropriate ground size for
use with ground filters. If the results
are not as expected, use pressurised
filters, which will give good results
regardless of ground size.
Regardless of the type of filter used
4
with the
for ground coffee, and depending
on the whether the coffee comes out
2
and
quickly or slowly, we recommend
changing the type of coffee, the
5
.
ground size or experimenting with
2
compactness to suit your preference.
4
.
1. Switch on the machine using the
2. Wait for the pilot light
ascaso

Preparation of coffee

Versatile
on/off switch
and place the
1
filter holder (with the filter) into the
group.
(approx. 1.5 minutes). This means
the coffee machine has reached
the ideal temperature. Turn on
coffee switch
and let water
2
come out by the coffee outlet.
Do this before making the coffee,
since this will remove residues and
balance the temperature to create
optimum working conditions.
to go out
6
21

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

ArcBasic

Table des Matières