Attaching The Presser Foot Shank - Singer 3221 Manuel D'instruction

Attaching the Presser Foot Shank

EN
Raise the presser bar (a) with the presser foot lifter. Attach
the presser foot shank (b) as illustrated. (1)
Attaching the presser foot
Install the pin (d) of the presser foot (e) into the cut-out (c) of
the presser foot lifer. (2)
Removing the presser foot
Push the pin (d) of the presser foot forward to separate. (3)
Attaching the edge/quilting guide
Attach the edge/quilting guide (f) in the slot as illustrated.
Adjust as needed for hems, pleats, quilting, etc. (4)
Attention:
Turn power switch to off ("O") when carrying out any of
the above operations!
a
b
1
c
e
3
43
a
c
b
d
e
2
f
4