Filling With Water - Honeywell CL201AE Mode D'emploi

USE & OPERATION
CAUTION
Unplug from power when refilling.

Filling with Water

Open the Water Fill Door located below the Remote Control
Holder on the unit. The water tank of the unit holds up to 5.3
gallons of water.
The Water Level display window is located on the front of
the unit. Refill the water tank when water level is low. Do not
fill water above the Max water level mark. Check water level
in the tank before running the COOL function. Please be sure
Water Fill Door
water in the tank is always above the MIN water level mark.
Running the unit with inadequate water may cause pump
failure. If ice is available you may add ice in the top
compartment to enhance the cooling performance.
Ice Loading Compartment
13