Change Of Operating Parameters - Nilfisk ALTO SCRUBTEC R 253 Instructions D'utilisation

ENGLISH

CHANGE OF OPERATING PARAMETERS

This function allows you to enter the screen (F, Fig. 7) to customise some parameter values described in the following table of
modifiable parameters.
1. Turn the ignition key (41) to "I" by pressing and
holding the push-buttons (A) and (B).
2. Press push-button (C) to increase the value of
the current parameter.
Press push-button (D) to decrease the value of
the current parameter.
3. Press push-button (E) to move to the next
parameter.
4. To return to the main screen, press and hold the
push-button (E) for more than 2 seconds.
TABLE OF MODIFIABLE PARAMETERS
Code Description
P1/P3 Level 1 solution flow rate in relation to level 3
P2/P3 Level 2 solution flow rate in relation to level 3
P3 Level 3 solution flow rate (flow rate as function of speed)
P4
Enablement of level 4 (2.8 l/min regardless of speed)
FVMAX Maximum forward speed
RVMAX Maximum reverse speed
WSMIN Minimum working speed
WSMAX Maximum working speed
BRK Electromagnetic brake activation delay
BAT (*)
Installed battery type (see table)
TOFF Automatic shut-off time
BRGH Display contrast
RPM (**) Reduced brush rpm activation threshold
RESET Restore factory settings for all parameters
(*) As described in the Use chapter, set the machine and the on-board battery charger (where fitted) on the basis of the type of
battery to be installed by modifying the BAT parameter from the table below:
Installed battery type
WET
GEL / AGM
GEL EXIDE
GEL OPTIMA
GEL DISCOVER
GEL FULLRIVER
(**) Increase the value of this parameter to reduce the brush motor speed in a wider range of applications and vice versa.
20
INSTRUCTIONS FOR USE
Wet cell batteries
Generic GEL or AGM batteries
GEL batteries or EXIDE
GEL batteries or OPTIMA™ brand
GEL batteries or DISCOVER
GEL batteries or FULLRIVER
SCRUBTEC R 253 - 9100000391
A
B
Figure 7
Minimum
0 %
0 %
1.0 cl/m
OFF
10 %
10 %
10 %
10 %
0 sec.
0
0 (disabled)
5
5
OFF
/SONNENSHINE brand
®
brand
®
brand
®
F
D
Values
Factory Setting Maximum
25 % 100 %
50 % 100 %
3.0 cl/m 5.0 cl/m
OFF
100 % 100 %
40 % 50 %
25 % 100 %
100 % 100 %
3 sec. 5 sec.
1
300 sec. 600 sec.
20
9
OFF
Value
0
1
2
3
4
5
E
C
P100879
ON
5
50
20
ON
1/15