Hendi 264119 Mode D'emploi page 6

Cleaning and maintenance
• After use, unplug the appliance from the power
socket and let it cool down.
• Clean the inside and outside of the body, grid and
crumb tray with luke-warm water, a mild deter-
gent and a soft cloth. Don't clean the heating el-
ements.
Trouble shooting
If the appliance does not function properly, please check the below table for the solution. If you are still unable
to solve the problem, please contact the supplier/service provider.
Problem
Turn temperature dial in the off posi-
tion and power light stays on
Power is connected but the salaman-
der doesn't heat up.
Indicator light doesn't work while the
salamander is heating up.
Technical specifications
Item
Operating voltage & frequency
EN
Rated power
Protection class
Waterproof protection class
Timer setting range
Temperature setting range
Technical specifications are subject to change without prior notification.
Warranty
Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or re-
placement provided the appliance has been used
and maintained in accordance with the instructions
and has not been abused or misused in any way.
Your statutory rights are not affected. If the appli-
ance is claimed under warranty, state where and
Discarding & Environment
At the end of the life of the appliance, please dis-
pose of the appliance according to the regulations
and guidelines applicable at the time.
6
• Use a brush to remove any encrustations from
the grid.
• Dry all parts with a dry cloth before storing the
salamander.
• Note! Do not clean the appliance with aggressive
chemicals or abrasives in order to prevent dam-
age to the surface.
Possible cause
Fuse broken
Check if the overheating protector is
malfunctioning
Indicator light not connected
Indicator light broken
264119
2000W
when it was purchased and include proof of pur-
chase (e.g. receipt).
In line with our policy of continuous product devel-
opment we reserve the right to change the product,
packaging and documentation specifications with-
out notice.
Throw packing materials like plastic and boxes in
the appropriate containers.
Solution
Contact the supplier.
Contact the supplier.
Contact the supplier.
Contact the supplier.
264201
230V~ 50Hz
2200W
Class I
IPX4
30 mins
50 °C to 300 °C
264300
3600W