Symptom
You cannot store a speed
dialing number.
You hear five short error beeps
when you try to make a speed
dial call.
Speed dialing is incorrect.
The handset does not ring
when calling from the base
phone.
The CHARGE lamp does not
light up when you place the
handset on the base phone.
The battery duration is short.
Remedy
• Make sure you follow the procedure in storing the
number correctly (page 14, 15).
• When the handset is in use, you cannot store a speed
dialing number on the base phone.
• You have entered a speed dialing number for which
no phone number has been stored.
• Store a correct number (page 14, 15).
• The handset may be engaged in conversation.
• The battery may be weak. Charge the battery for more
than 12 hours (page 9).
• Move the handset closer to the base phone.
• Place the base phone away from noise sources (page
6).
• Wipe the charge terminals of the base phone and the
handset with a soft cloth for better contact of the
charge terminals.
• Make sure the handset is placed on the base phone
properly.
• The battery pack was charged less than 12 hours (due
to power failure, etc.).
• The usable life of the battery has expired and needs
replacement.
Additional Information
27
EN