Mounting The Base Phone On A Wall - Sony SPP-206 Mode D'emploi

Mounting the base phone on a wall

1
Hang-up tab
2
AC power
adaptor cord
3
Wall
bracket
Tip
To remove the wall bracket, press the lower tabs.
24
EN
Additional Information
Telephone
line cord
1
2
Wall plate
AC outlet
1
Reverse the hang-up tab.
2
Plug the telephone line cord to
the LINE jack and the AC power
adaptor to the DC IN 9V jack.
Use the shorter cord for
mounting.
3
Attach the wall bracket to the
center of the base phone.
Align the ¢ marks of the wall
bracket with those of the base
phone.
4
Plug the telephone line cord to
the telephone outlet, and hook
the base phone to the wall plate.
5
Plug the AC power adaptor to
an AC outlet. Then fully extend
the antenna so that it points
towards the ceiling.
4,5
AC power adaptor
Telephone
line cord