Intended Use; General Safety Instructions - SATA 100 prep Mode D'emploi

Operating Manual SATA filter 100 / 101 / 103 prep
5.

Intended Use

The SATA filter 100/101/103 prep serve the purpose of compressed air
purification. They separate solid and liquid particles as well as partially
gaseous components from the compressed air streaming through the
filter.
6. Safety Instructions

6.1. General Safety Instructions

• Before using the filters, please read the safety and operating instruc-
tions completely and carefully. Safety instructions and specified steps
are mandatory.
• Keep all enclosed documents and pass on the filter together with
these documents only.
6.2. Filter Specific Safety Instructions
• Local safety, accident prevention, work and environment protection
regulations are mandatory!
• Use, cleaning and maintenance by skilled personnel only!
• Never use the filter when it is damaged or when components are
missing!
• Check and, if necessary, repair the filter on a regular basis!
• Put filter out of operation immediately when it is damaged!
• Never carry out unauthorised or technical modifications on the filter!
• Use original SATA spare parts and accessories only!
6.3. Use In Explosive Areas
The filter is approved for the use in explosive areas classified as Ex-zone
1 and 2.
The SATA filter 100/101/103 prep due to their conception, design and con-
struction comply with the basic safety requirements of the directive 94/9/
EU. The respective documents required by directive 94/9/EU Annex VIII
are deposited for 10 years at the designated location, number 0123 with
the documentation number 70023722.
Warning! Attention!
Warning! Attention!
EN
63