Planika Pure Flame Notice De Montage page 15

TROUBLESHOOTING
Some alarms are accompanied by a sound signal. Press START/STOP to mute.
Lp. DIODES
1.
2.
3.
4.
5.
6.
FUEL
Use only fuels consisting of
and viscous fuels or fuels of improper electric conductivity. The values must be compliant with those of FANOLA®.
Other fuels, such as dehydrated ethanol (i.e. consisting of more than 96,6% by volume ethanol) will cause a device error
and loss of the guarantee.
CLEANING –
CLEAN WITH A DAMP CLOTH AND DELICATE DETERGENTS, ONLY WHEN THE DEVICE IS
TURNED OFF AND COOLED.
SERVICE -
(KEEP
WWW.PLANIKAFIRES.COM/SERVICE
(contact the Service Department if the solution does not eliminate the error)
The device is being cooled. Wait for the green diode
The device run out of fuel while operating. The device is being cooled.
Wait for the red diode to turn off. Refill the tank.
Fuel has spilled in the device. Please contact service departament.
Device error. Press and hold ECO for 10 seconds.
Device error. Press the ECO button for 10 seconds.
Room temperature too low (<10°C) or device error. Increase the room temperature.
Press and hold ECO for 10 seconds. Wait for the green diode
86-96,6% ethanol by volume. FANOLA® is the recommended fuel. Do not use gel, thick
Fuels consisting of 100% by volume ethanol will damage the device.
THE PROVIDED
SOLUTION
USB CABLE FOR
15
.
.
SERVICING PURPOSES)