Hama 00075299 Mode D'emploi page 5

5. Installation and Settings
Note
• After removal of the batteries' contact
breaker, the normal time is displayed in
12-hour format and a melody signals that
the product is ready for use.
• The function modes are organized as
follows: Normal time mode → 12 h/24 h
format/time/date → Alarm and snooze
function → Birthday reminder → Timer →
Normal time mode
• When the item flashes, it means that the
item selected can be set.
5.1. Setting 12 h/24 h Format, the Time,
and the Date
• In normal time mode, press the MODE button
once to switch between 12 h and 24 h format.
• Use the ▲ and ▼ buttons to select the format
you want to use.
• Then press the SET button to set the time
using the ▲ and ▼ buttons. The time is set
beginning with the hour in the format that was
previously selected, 12 or 24 hour time.
The hour flashes in the display.
• Next press the SET button to set the minutes
using the ▲ and ▼ buttons.
The minutes flash in the display.
• Next press the SET button to set the current
year using the ▲ and ▼ buttons.
The year flashes in the display.
• Next press the SET button to set the current
month using the ▲ and ▼ buttons.
The month (M) flashes in the display.
• Next press the SET button to set the current
day using the ▲ and ▼ buttons.
The day (D) flashes in the display.
• After making the settings, press the MODE
button four times to return to normal time
mode.
Note
• In the course of setting the date, the day
of the week – Monday (MON) to Sunday
(SUN) – is set automatically.
• If no button is pressed for one minute
while the settings are being made, the
device automatically switches back to
normal time mode. The settings that were
made up to that point are not saved!
5.2 Alarm and Snooze Function
• In normal mode, press the MODE button two
times or press the ALARM button directly to
switch to alarm mode.
• In alarm mode, press the SET button and
use the ▲ and ▼ buttons to set the hour
for the alarm.
• Next press the SET button to set the minutes
using the ▲ and ▼ buttons.
• Then press the SET button to select an alarm
melody from the melodies 1 through 9 using
the ▲ and ▼ buttons.
• After making all the settings, press the
MODE button three times to return to normal
time mode.
Note – Alarm function
• The alarm goes off every day at the
set time.
• The active alarm function is indicated by
the word 'Alarm' in the display.
• To completely deactivate the alarm
function, press the ALARM button in
normal time mode to switch to alarm
mode. Press the SET button five times
until you only see three dashes in the
display (-:--).
When the alarm function is active, press the
▲ button in normal time mode to activate or
deactivate the snooze function.
3