Makita AN923 Manuel D'instruction page 8

► 1. Pliers 2. Slot
Nails
Nail
Handle nail coils and their box carefully. If the nail coils
have been handled roughly, they may be out of shape
or their connector breaks, causing poor nail feed.
Avoid storing nails in a very humid or hot place or place
exposed to direct sunlight.
Humid
Nail
MAINTENANCE
•
1
2
•
Maintenance of the nailer
Always check the tool for its overall condition and loose
screws before operation. Tighten as required.
With tool disconnected, make daily inspection to assure
free movement of the contact element and trigger. Do
not use tool if the contact element or trigger sticks or
binds.
Hot
Make sure that the trigger is locked when the change
lever is set to the
8 ENGLISH
CAUTION:
Always disconnect the air hose from the tool
before attempting to perform inspection or
maintenance.
Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
position.