Assembly; Securing In The Bathtub; Swiveling The Seat; Use - DeVilbiss Healthcare Drive BES 120 Mode D'emploi

Assembly

Push the left and right support arms into the mount;
in doing so, select the first hole for an upper tub edge
width up to 63 cm or the second hole for a tub edge
width up to 58 cm (photo 1). Now insert the clips into the
holes, as shown in photo 2. Ensure that all 4 clips are in-
serted (photo 3).

Securing in the bathtub

4
The edge of the tub must be clean and dry. Always ad-
just the width of the supports to the maximum width in
order to guarantee secure support.

Swiveling the seat

5
Drive Medical GmbH & Co. KG | As per: 07.08.2020 | Errors and alterations excepted
Rotate both set screws
(1) until they touch the
edge of the tub and
prevent the seat from
slipping (photo 4).
The seat can be
swiveled after pulling
the locking lever (2)
(photo 5).
This function should be
checked prior to initial

use.

Use
• Hold onto the armrests securely with both hands and
sit on the seat.
• Now pull the locking lever (2) upwards, raise your legs
and swivel them into the tub (photo 5).
• The released locking lever automatically clicks into
all 90° positions. Do not press the locking lever
downwards!
• To get out of the tub, follow the steps in reverse order.

Cleaning | Maintenance

• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based
cleaners!
• To disinfect, a spray disinfectant can be used such as
Descosept AF or Bacillol AF.
• Check the screws regularly and tighten, if necessary.
• The product should not be exposed to temperatures
above 60°C for long periods of time (for example, use
in a sauna, etc.).
• In the event of defects, contact your specialist dealer
from whom you purchased this product.

Technical data

Article number
HMV (medical aids
register) no.
Max. load
Seat width x seat depth
Overall width
Height of backrest
Seat adjustment
Color
Total weight
Frame material
Seat material
EN
550600200
04.40.02.3020
120 kg
40 x 40 cm
79 cm
46 cm
4 x 90°
white
4,3 kg
Aluminium, pow-
der-coated
Plastic (PE-HD)
9
Instructions for use BES 120