Table des Matières
Publicité
8.
Technical Specifications
cover ............................. PMMA (Polymethyl Methacrylate)
housing .................... ABS (Acrylonitrile Butadiene Styrene)
IP-rating ................................................................ IP44
input voltage .................................... 12 - 250 V AC or DC
transmitter ............................ IR LED, wavelength 750 nm
range ................................................................. ≤ 10 m
beam spreading angle .............................................. 1.5°
contact capacity .................. 0.5 A / 120 V~ (1 A / 30 VDC)
response time ....................................................... 10 ms
delay time of relay............................................... 100 ms
operating temperature ........................... -25 °C to +60 °C
storage temperature .............................. -35 °C to +80 °C
dimensions
transmitter ............................ 122 (H) x 60 (W) x 62 (T)
reflector .................................................. Ø 80 x 7 mm
weight .............................................................. ± 200 g
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual,
please visit our website www.velleman.eu. The information in
this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
V. 04 – 04/09/2017
PEM10D2
8
©Velleman nv
Publicité
Table des Matières
