sunjoe SJGC7 Instructions D'origine page 7

Fig. 15
Axle
17. Insert a cotter pin into the inner hole on the axle, and bend
each tip of the cotter pin outward and backward around
the axle to secure it (Fig. 16).
Fig. 16
Cotter pin tips
18. Then place a flat washer #1, an inflated wheel, and
another flat washer #1 onto the axle (Fig. 17).
Fig. 17
Flat washer #1
19. Secure the wheel with another cotter pin on the outer hole
at the end of the axle (Fig. 18).
Axle clamps
Cotter pin
Wheel
Flat
washer #1
7
Fig. 18
Nuts
20. Repeat steps 17 – 19 to assemble the other wheel.
21. Tighten the two nuts on the axle clamps on both sides
(Fig. 18).
22. Turn cart right side up so the cart rests on its wheels. Slide
the front panel in to complete assembly (Fig. 19).
Fig. 19
Cotter
pin
Front
panel