Setting The Current Time; Setting The Auto Future Start Time - Calphalon Quick Brew 12 Guide De L'utilisateur

To avoid burns and injury to persons, always keep the carafe lid on the carafe
when pouring brewed coffee.

setting the Current Time

noTe: you do not need to set the current time if you are not using the AUTO
future brewing time feature.
1. Plug the coffee maker into a 120V AC outlet. The display
window will illuminate.
2. Press the SET button.
noTe:
• Press and hold arrow timer buttons to fast advance.
• Pay attention to the AM and PM display.
• If no buttons are pressed after 5 seconds, the displayed setting
will be saved.
setting the aUTo future brew start Time
1. Plug the coffee maker into a 120V AC outlet. The display window will
illuminate.
2. If the current time is not already displayed, set following the procedures
outlined previously. (See setting the Current Time above.)
3. Press the AUTO/CANCEL button. The AUTO/CANCEL indicator
light will illuminate.
4. The HOUR and MINUTES display will begin to flash. Press the UP
or DOWN arrow timer buttons to set the current time. Press the SET
button again or wait for 5 seconds to confirm the correct AUTO time
setting.
5. oPTIonal: Press MODE button to select BOLD or 1-4C settings.
3. The HOUR and MINUTES display will begin to flash.
Press the UP or DOWN arrow timer buttons to set
the current time. Press the SET button again or wait for
5 seconds to confirm the correct time setting.
6. AUTO will appear on the digital display
11