Power Supply - Knick VariTrans P 27000 Notice D'utilisation

4. Mounting
The universal isolators are mounted on standard TS 35 rails.
5. Electrical Connection
Terminal assignments
1 Input +
2 Input +
3 Input +
4 Input -
5 Output +
6 Output -

7 Power supply

8 Power supply
Wire cross-section max. 2,5 mm
Multi-wire connection max. 1 mm
(two wires with same cross-section)
AWG 30-12, tightening torque 0.7 Nm
Wiring has to be suitable for a
temperature of min. 75 °C
Warning!
Do not operate inputs for current and voltage simultaneously! For applications
with high working voltages, take measures to prevent accidental contact and
make sure that there is sufficient distance or insulation between adjacent
devices!
5.1 Power supply
22 to 230 V AC/DC ± 10 %, 0.9 W, AC 48 to 62 Hz, 2.5 VA,
(overvoltage category II)
> 5 mA
≤ 500 mV / ≤ 5 mA
> 500 mV
2
2
39