DeLonghi DFP950 Mode D'emploi page 10

Hints
- Use fresh ingredients.
- Don't cut food too small. Fill the width of the large
feed tube fairly full. This prevents the food from
slipping sideways during processing. Alternatively
use the small feed tube.
- When using the fine chipper disc, place ingredi-
G
ents horizontally .
- When slicing or shredding: food
F
placed upright comes out shorter than food
G
placed horizontally .
- It is normal to have a small amount of non-shred-
ded food on the top of the disc after processing.
27
CITRUS PRESS (OPTIONAL)
Use the citrus press to squeeze the juice from citrus fruits (e.g. oranges, lemons, limes and grapefruits).
a cone
b sieve
TO USE THE CITRUS PRESS
1 Fit the drive shaft and bowl onto the power unit.
2 Fit the sieve into the bowl - ensuring the sieve handle is locked into position directly
H
over the bowl handle .
3 Place the cone over the drive shaft turning until it drops all the
I
way down .
4 Cut the fruit in half. Then turn the speed dial and press the fruit onto the cone.
- The citrus press will not operate if the sieve is not locked correctly.
28
MILL (OPTIONAL)
Use the mill for milling herbs, nuts and coffee beans.
- blade unit
- sealing ring
- jar
- sprinkler lid
SAFETY
- Never fit the blade unit to your machine without the jar fitted.
- Never unscrew the jar while the mill is fitted to your machine.
- Don't touch the sharp blades. Keep the blade unit away from children.
- Never remove the mill until the blades have completely stopped.
Important
- To ensure the long life of your mill, never run for longer than 15 seconds. Switch off as soon as you've got the right consistency.
- Don't process spices - they may damage the plastic.
- The machine won't work if the mill is fitted incorrectly.
- Use for dry ingredients only.
10
F
A
B
G
I
H