GB
Assembly and safety information / packing list - plastic web panels
Before you set up the greenhouse, please take the
time to carefully read through these instructions to
avoid damaging the equipment or setting it up
incorrectly. Once you have finished setting up the
greenhouse, please keep the instructions safe for
future reference.
Plastic web panels: The outside of the plastic web panels
(with UV coating) is marked „Außenseite / Outside" at the
edge, and it is also the side onto which the protective film
has been stuck. Only remove the protective film from the
plastic web panel you are currently installing.
Please ensure that all packaging materials are recycled
through the appropriate channels.
Packing list - plastic web panels
The plastic web panels for your greenhouse are shipped in several packages.
4 panels
Plastic web panels
Package No.
Contents
Plastic web panels
Front wall
Plastic web panels
Rear wall
Plastic web panels
2 panels
Plastic web panels
2 panels
7 panels
Plastic web panels
Package No.
Contents
Plastic web panels
Front wall
Plastic web panels
Rear wall
Plastic web panels
2 panels
Plastic web panels
2 panels
Plastic web panels
3 panels
!
Notes on the assembly instructions:
In the assembly instructions, the 5-panel model (2 panels + 3 panels) serves as a reference model. The
overview diagrams all show this model. The other greenhouses are only different to this model in terms of
the number of side panels. If you have purchased one of the other models, please refer to the relevant
assembly instructions for your greenhouse.
To assemble the greenhouse, please follow the sequence of steps and the illustrations shown in the
German assembly instructions. This accompanying booklet contains all of the important assembly
information and any other important text in your language. These accompanying texts on the following
pages are sorted according to the page numbers (German instructions) and by assembly step to make
it easier to follow the corresponding texts in the German instructions.
ABA_RUBIN_Teil2_Titel+GB.pmd
5 panels
Plastic web panels
Package No.
Plastic web panel overviews:
Pages 6 to 13 in the German assembly
instructions contain the following
plastic web panel overviews:
Page 6: Three-dimensional view of
the plastic web panels for a 4-panel
greenhouse (top: front view; bottom:
view from behind)
Page 7: Three-dimensional view of
the plastic web panels for a 5-panel
greenhouse (top: front view; bottom:
view from behind)
Page 8: Three-dimensional view of
the plastic web panels for a 6-panel
greenhouse (top: front view; bottom:
view from behind)
3
Important safety instructions for installation
•We recommend that the installation should be performed
by 2 persons.
•To prevent the risk of accidents, please keep children
at a safe distance while installing the greenhouse.
•Always wear safety gloves, safety goggles and
safety shoes during installation of the plastic web panels.
Risk of injury and breakage: Please get help from
a second person when installing the plastic web panels
in the roof area.
•Once you have completely finished assembling
the greenhouse, tighten all the nuts, bolts and screws
again with the open-ended wrench or ring wrench!
6 panels
Plastic web panels
Contents
Package No.
Plastic web panels
Front wall
Plastic web panels
Rear wall
Plastic web panels
2 panels
Plastic web panels
3 panels
Page9: Three-dimensional view of
the plastic web panels for a 7-panel
greenhouse (top: front view; bottom:
view from behind)
Page 10: Plastic web panel
dimensions for the front wall (top)
and rear wall (bottom)
Page 11: Plastic web panel
dimensions for the side and roof
for greenhouses with 4 panels
Page 12: Plastic web panel
dimensions for the side and roof
for greenhouses with 5 or 7 panels
Page 13: Plastic web panel
dimensions for the side and roof
for greenhouses with 6 panels
07.04.2006, 09:48
Contents
Plastic web panels
Front wall
Plastic web panels
Rear wall
Plastic web panels
3 panels
Plastic web panels
3 panels
3