Use Of The Appliance - Domo DO465FR Mode D'emploi

www.domo-elektro.be
COMPONENTS
1. Stainless steel housing
2. Removable oil container
3. Support
4. Handles
5. Lid with grip and filter
6. Frying basket
7. Foldable basket handle
8. Control panel
9. Heating element
10. Temperature control
11. Red power indication light
12. Green temperature indication light
13. Safety

USE OF THE APPLIANCE

1. Remove all packaging materials.
2. Before first use clean the deep fryer according to the instructions.
3. Place the deep fryer on a horizontal, heat-resistant surface.
4. Place the handle in the horizontal position until it clicks.
5. Open the lid and remove the basket.
6. Fill the frying pan with liquid oil, suitable for heating, until the oil level is situated
between the "MIN" and "MAX" level indicated on the frying pan. Don't ever use
the appliance when there is too much or to little oil in the pan.
7. Place the basket back in the pan.
8. Place the plug in the outlet. The red light will go on.
9. Switch the appliance on by turning the temperature knob.
10. Select the desired temperature with the temperature knob. The oil will start to heat
up. The green light will go on when the desired tempeature is reached. The deep
fryer is now ready for use.When the oil temperature gets too low, the indication
light of the temperature will switch off and will light up again when the desired
temperature is reached again.
11. Place the food you wish to fry in the basket, place the basket carefully back into
the oil. Only fill half of the basket, for a better baking result.
Note: to preserve the quality of the oil, it is recommended to spice the food after
frying.
12. Remove the basket carefully out of the oil and check if the food is thoroughly
cooked.
13. Let the food drip for 10 to 12 seconds.
4
2
3
1
39
6
7
12
8
9
5
DO465FR
11
10
13