Melitta Caffeo CI Mode D'emploi page 28

Operation of the menus
Preparing beverages with ground
coffee
■ Switch on the appliance.
■ Open the lid of the ground coffee
chute 8.
■ With the supplied coffee scoop, fi ll
the ground coffee (do not use instant
products) into the ground coffee chute 8
(max. one coffee scoop).
■ Close the lid of the ground coffee
chute 8.
■ Place a vessel under outlet 3.
■ Press the
now starts. If no coffee was dispensed
from the appliance within 3 minutes after
opening the ground coffee chute, the
appliance will switch back to coffee bean
operation and will discard the ground
coffee into the coffee grounds container
to prevent later risk of overfi lling the
brewing chamber.
■ The dispensed quantity can be adjusted
or prematurely stopped by turning the
rotary switch.
■ The preparation of 2 cups using the
button is not possible.
My Coffee button: Preparing
beverages with personal settings
■ Switch on the appliance.
■ Place a vessel under the outlet.
■ Press the My Coffee button
continuously until the desired user name
appears on the display.
■ Press the button for the desired
beverage (Page 26).
Beverage dispensing will start.
■ To exit the My Coffee mode, press
the My Coffee button
until the time or Ready appears on the
display.
28
button. Coffee dispensing
continuously
Operating Instructions: Melitta
Operation of the menus
■ With the appliance switched on, press
the rotary switch 10 for longer than two
seconds. The main menu will appear on
the display 4.
■ Turn the rotary switch 10 to select a
sub-menu.
■ Press the rotary switch 10 to call up a
selected sub-menu.
■ Select Exit to exit the respective menu
and to return to the previous menu.
■ Select Exit in the main menu or press
any dispensing button to return to
standby mode.
Overview of the submenus
Submenu Meaning
"Exit" To exit the main menu
"My Coffee" To enter personal coffee
settings
"Care" Rinsing, Easy Cleaning,
Intensive Cleaning, cleaning,
descaling, insert fi lter
"Energy- To change the energy-
Saving Mode" saving mode settings
"Set clock" To change the time
"Auto OFF" To change the settings for
automatic switch-off
"Water
Setting the water hardness
hardness"
"Language" To change the language
"Statistics"
To display the total number
of dispensed beverages
"System" To reset the appliance to the
default settings
CI
® ®
| 1834-0618 | 2018-08