Preparing The Load - Miele professional A 300/2 Mode D'emploi

Preparing the load

Ideally, a gap should be left between neighbouring items when they
are reprocessed.
An additional frame can be mounted when reprocessing particularly
fragile items. This prevents them from touching each other if they
are moved by the force of water during reprocessing.
If bulbous items are loaded in neighbouring positions in the module,
the items may touch each other.
If the cleaning and rinsing requirements are particularly high, a dif-
ferent position must be selected on the module for these items.
 Damage to the items.
If items touch each other during reprocessing, damage can occur
at the points of contact, for example, the items may become
scratched or the glass may break.
If the items are fragile:
– Select a different position on the module
– Use a frame
– Select a module with a greater distance between the nozzles
en - Areas of application
37