Product Description And Specifications - Bosch GRW 12 E Professional Notice Originale

10 | English
Mixer safety instructions
Hold power tool by insulated gripping surfaces, when
u
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting ac-
cessory contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator
an electric shock.
Hold the tool with both hands at the intended handles.
u
Loss of control can cause personal injury.
Ensure sufficient ventilation when mixing flammable
u
materials to avoid a hazardous atmosphere. Develop-
ing vapour may be inhaled or be ignited by the sparks the
power tool produces.
Do not mix food.Power tools and their accessories are
u
not designed for processing food.
Keep the cord away from the working area. The cord
u
may be entangled by the mixer basket.
Ensure that the mixing container is placed in a firm
u
and secure position. A container that is not properly se-
cured may move unexpectedly.
Ensure that no liquid splashes against the housing of
u
the power tool.Liquid that has penetrated the power tool
can cause damage and lead to electric shock.
Follow the instructions and warnings for the material
u
to be mixed.Material to be mixed may be harmful.
If the power tool falls into the material to be mixed,
u
unplug the tool immediately and have the power tool
checked by a qualified repair person.Reaching into the
bucket with the tool still plugged in can lead to electric
shock.
Do not reach into the mixing container with your
u
hands or insert any other objects into it while mix-
ing.Contact with the mixer basket may lead to serious
personal injury.
Start up and run down the tool in the mixing container
u
only. The mixer basket may bend or spin in an uncon-
trolled manner.
Do not use on explosive materials (e.g highly flam-
u
mable solvents). Power tools produce sparks which can
ignite fumes.
Follow the instructions and warnings in the safety
u
data sheets (SDS) of the mixing material. The mixing
material may be harmful.
Technical Data
Stirring mechanism
Article number
Rated power input
Power output
Mechanical gear selection
No-load speed
1 609 92A 5TA | (19.05.2020)
In the event of a power interruption, release the lock-
u
ing switch by pressing the on/off switch. This will pre-
vent the power tool from restarting unintentionally (risk of
injury).
Do not use the power tool when it is connected to a
u
stand. Bench-mounted operation of the power tool is not
permitted.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is suitable for stirring construction materials
in powder form, such as mortar, plaster, adhesives and
paints and varnishes which do not contain solvents, as well
as similar substances.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Gear selector switch (GRW 18-2 E)
(2) On/off switch
(3) Drive spindle
A)
(4) Stirrer paddle
(5) Handle (insulated gripping surface)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GRW 12 E
3 601 AA7 0..
W 1200
W 780
–
GRW 18-2 E
3 601 AA8 0..
1800
1170
●
Bosch Power Tools