Turning On Hotplates; Turning On Glass Ceramic; Turning On And Adjusting The Static Oven; Turning On And Adjusting The Fan Oven - Lotus cookers CF4-78ET Instructions Pour L'installation Et L'emploi

Cuisinières avec four électrique usage professionnel

Table des Matières

Les langues disponibles

Switch on the main switch installed above the appliance. Turn the control knob corresponding to the hotplate from

position "0" to the degree of coking desired, between 1 and 6. The light comes on, as son as the power supply is on. It is

advisable to turn on the hotplate at maximum temperature and, as soon as this is reached, turn the control knob to the

level desired. To turn off the hotplate, turn the knob back into position "0".

Switch on the main switch installed above the appliance. Turn the control knob corresponding to the hotplate from

position "0" to the degree of heating desired, between 1 and 6. The light comes on, as son as the power supply is on.

The green light indicates the presence of electrical tension. To turn off the hotplate, turn the knob back into position

"0". The hotplates are made up of a nucleus and a crown.

Turning the knob, as indicated above, only the nucleus of the hotplate comes on; turning the knob beyond position "6",

the crown also comes on and the temperature can, once again be regulated from pos. "1" to pos. "6".

Turn the control knob to the right and set the temperature wanted.

To turn the oven off, turn the knob to the left to position 0.

To turn the oven on, turn the selector knob (see figure) to the right or left into one of the

following positions

Bottom heating element

Top heating element

Caution: when the oven is on the door must be kept shut otherwise the knobs and protection sheet could get

hot and be damaged.

The hot air made to circulate by the fan is distributed in all parts of the oven chamber to

ensure even cooking results. Since the oven chamber is heated evenly, different foods can be

cooked together on different rungs

Turn the knob from "O" into the desired position between 50° and 300°; The white and

green lights come on.

The green light indicates the presence of electrical tension.

The white light shows that the heating element is working; when the temperature is reached,

it goes out. To turn off the appliance, turn the knob into position "O".

NB: Cookers are provided with an acoustic timing device, able to signal a maximum time of

120 minutes. Turn the knob to the right, positioning on the time desired, between and

including 0 to 120 minutes (see figure); at the end of the set time, the alarm goes off.