Velleman PROCD220 Mode D'emploi page 2

4. Installation
• Install the device in a location with few passers-by and that is unreachable for unauthorised persons.
• Make sure there is no flammable material within a 50cm radius of the device.
5. Use
• Make sure the power switch is set to "OFF".
• Connect the power cable with the mains.
• Set the power switch to "ON" to activate the device.
• Set the power switch to "OFF" to deactivate the device.
6. Front Panel Description
1. POWER SWITCH
Press the power switch to turn the unit on or off.
2. EJECT BUTTON
Press the button to open or close the tray.
3. JOG & SHUTTLE WHEELS
Shuttle: Use the dial to select the scanning direction and speed. The disc is scanned in the forward direction
when the shuttle dial is turned clockwise from the neutral, in the reverse direction when the shuttle dial is
turned counterclockwise. The scanning speeds up when the shuttle dial is turned faster.
Jog: In pause mode, if you turn the jog, the point at which the sound is being produced moves by a number
of frames corresponding to the number of clicks. Clockwise moves the point forward, counterclockwise
moves the point backwards. In play mode, the jog increases or decreases the speed of the song. (clockwise:
increase, counterclockwise: decrease)
4. SKIP<< BUTTON
Use this button to restart the track or to select the previous track.
5. +10 BUTTON
Use this button to jump 10 tracks in one press.
6. SKIP>> BUTTON
Use this button to go to the next track.
7. CUE BUTTON
Press the CUE button during play to return to where play was started.
8. PLAY / PAUSE BUTTON
Press this button to toggle between play and pause.
PROCD220 2 VELLEMAN