Recalling Memorized Results; Power Adapter (Optional) - Topcom BPM ARM 1900f Mode D'emploi

11 Recalling memorized results

When the batteries are installed, the data in the memories will
not be lost even when the Blood Pressure Monitor is switched
off. Remove the batteries for more than 10 seconds to erase
the memories.

12 Power adapter (optional)

AC A dapter
(O ptional )
Output: 6V DC
1A (5.5¯ /2.1¯ )
• Connect the AC adapter jack with the AC adapter connector on the back
of the unit.
• Plug the AC adapter into the wall socket.
Only use the optional Topcom BPM Arm 1900f power adapter.
To recall stored blood pressure
measurement results from the memory:
• Press the MEMORY button. The
last memorized result will be
displayed.
• Press the MEMORY button again
to recall the previous result...
Topcom BPM 1900f
11