Table Des Matières; Introduction - Husqvarna AUTOMOWER 105 Manuel D'utilisation

1 Introduction.......................................................2
2 Safety............................................................... 9
3 Installation...................................................... 11
4 Operation........................................................15
5 Maintenance................................................... 18
6 Troubleshooting..............................................19

1.1 Introduction

Serial number:
PIN code:
The serial number is on the product rating plate and on the product carton.
• Use the serial number to register your product on www.husqvarna.com.
1.2 Support
For support about the product, speak to your Husqvarna
servicing dealer.
1.2.1 Complete Operator's Manual
A complete operator's manual is available on
Husqvarna's website www.husqvarna.com. It is more in
detail about e.g. instructions about installation,
maintenance, troubleshooting and menu structure.
1.2.2 Product description
Note:
Husqvarna regularly updates the appearance
and function of the products. Refer to
2 .
The product is a robotic lawn mower. The product has a
battery power source and cuts the grass automatically.
Collection of grass is not necessary.
The operator selects the operation settings with the
buttons on the keypad. The display shows the selected
and possible operation settings, and the operating mode
of the product.
The boundary wire and the guide wire control the
movement of the product within the work area.
®
1.2.2.1 Automower Connect
®
Automower Connect is a mobile application that makes
it possible to select the operation settings remotely.
Connectivity on page 16 .
Refer to
2 - Introduction
Contents
7 Transportation, storage and disposal............. 20
8 Technical data................................................ 21
9 Warranty......................................................... 28
10 Applicable to US/CA market......................... 29
11 Compliance requirements, Brazil..................29
12 Compliance requirements, Argentina........... 30
1 Introduction
1.3 Capacity
How big an area the product can keep cut depends
primarily on the condition of the blades and the type,
growth and moisture of the grass. The shape of the yard
is also significant. If the yard mainly consists of open
lawn areas, the product can mow more per hour than if
the yard consists of several small lawns separated by
trees, flower beds and passages. For working capacity,
refer to
It is recommended to allow the product to mainly mow in
dry weather to obtain the best possible result. The
product can also mow in rain, however wet grass easily
sticks on the product and there is a greater risk of
Support on page
slipping in steep slopes. The blades must be in good
condition to obtain the best mowing result. In order to
keep the blades sharp for as long as possible it is
important to keep the lawn free from branches, small
stones and other objects. Replace the blades regularly.
Refer to
1.4 Movement pattern
The movement pattern of the product is random. This
means that the lawn is mown evenly without any
mowing lines.
Technical data on page 21 .
Replace the blades on page 19 .
1418 - 007 - 17.09.2020