Orbit WaterMaster 57096 Manuel De L'utilisateur page 10

TRF230792 57096-27T rC.qxd
es
Figure 6: Station Duration for Program A
You can set the watering duration from 1 to 99 minutes. Press and
hold the + key to advance the number of minutes, or use the - key to
go in reverse, then press enter. When the minutes are set, a solid
"A" or "B" will appear over station 1 and the cursor will advance to
station 2 and continue blinking
Simply repeat these steps to set watering durations for stations 2
through 6 (or 2 - 12).
To skip a station, press the Next key.
To erase previously programmed watering durations, press the Clear
key.
or
Assigning Watering Days for Program A
Turn the rotary dial to Watering Days in program A. The display will
show an "A" and the cursor will blink under the days of week M, T, W,
T, F, S, S Monday, Tuesday, etc [See Figure 7 ].
3/13/03 3:46 PM Page 9
Figure 7: LCD Display with Watering Days
Press enter to activate watering on Monday. An arrow appears
under M and the cursor will advance to Tuesday ("T"), press enter to
activate watering on this day. Repeat these steps for all days of the
week.
To skip a day, press next.
To delete a previously entered day, press clear.
If you want to water every second day, press the next key to
advance the cursor to "2nd", then press
Note: If you choose to water every 2nd day, you cannot set specific days
of the week for watering.
Assigning Watering Intervals for Program B
Program B is used to water at specific intervals between days (1 to 28), or
on odd or even calender dates. The Timer has a leap-year compensator
and will ensure conformance to the odd and even schedule through the
year 2100.
5