Transport, Packaging And Storage - WIKA MH-3 Mode D'emploi

3. Safety/4. Transport, packaging and storage
3.5 Labelling, safety marks
Product labels
EN
wika.com
MH-3
1 Product no.
2 Serial no.
MH-3-HY
1
Made in Germany
E₁
2
WIKA Alexander Wiegand SE & Co. KG; 63911 Klingenberg
1 Product no.
2 Approvals
3 Nominal working pressure (NWP)
The nominal working pressure per 79/2009/EC corresponds to a nominal working pressure at 15 °C

4. Transport, packaging and storage

4.1 Transport
Check the pressure sensor for any damage that may have been caused by transport.
Obvious damage must be reported immediately.
4.2 Packaging and storage
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change
in installation site, sending for repair).
Permissible conditions at the place of storage:
Storage temperature see chapter 9 "Specifications"
■
Humidity: 67 % relative humidity (no condensation)
■
Avoid exposure to the following factors:
Direct sunlight or proximity to hot objects
■
Mechanical vibration, mechanical shock (putting it down hard)
■
Soot, vapour, dust and corrosive gases
■
Hazardous environments, flammable atmospheres
■
8
1
2
4
3 Coded date of manufacture
4 Measuring range
3
4
4
e 1
2
5
4 Specifications
5 Coded date of manufacture
WIKA operating instructions, OEM pressure sensor, model MH-3
3
2
5