Honda GXH50 Manuel De L'utilisateur page 11

Draining the Fuel Tank and Carburetor
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when handling fuel.
• Stop the engine and let it cool before handling fuel.
• Keep heat, sparks, and flame away.
• Handle fuel only outdoors.
• Keep away from your vehicle.
• Wipe up spills immediately.
1. Place an approved gasoline container below the carburetor, and use
a funnel to avoid spilling fuel.
2. Drain the fuel tank and carburetor.
CARBURETOR EQUIPPED WITH A DRAIN HOSE AND SCREW: Loosen
the carburetor drain screw, then move the fuel valve to the ON
position.
CARBURETOR
CARBURETOR DRAIN SCREW
CARBURETOR EQUIPPED WITH DRAIN BOLT:
Loosen the carburetor drain bolt, then move the fuel valve to the ON
position.
CARBURETOR DRAIN BOLT
3. After all the fuel has drained into the container, tighten the
carburetor drain bolt or carburetor drain screw securely.
DRAIN HOSE
CARBURETOR
ENGLISH
Engine Oil
Change the engine oil (see page 8).
Engine Cylinder
1. Remove the spark plug (see page 9).
2. Pour a teaspoon 5–10 cm
cylinder.
3. Pull the starter grip several times to distribute the oil in the cylinder.
4. Reinstall the spark plug.
5. Pull the starter grip slowly until resistance is felt. This will close the
valves so moisture cannot enter the engine cylinder. Return the
starter grip gently.
3
(5–10 cc) of clean engine oil into the
11