LENCO Xemio-280 Mode D'emploi page 11

Bluetooth is in transmitting.
Bluetooth Transmission is On
• To search for new Bluetooth Device;
• Before you search for new device, please disconnect the
current paired device. For better result, turn the paired
Bluetooth receiver to power off.
• Choose "Search Device" the device searching mode will start
again for new device(s) name list to choose again;
• Choose new found and wanted Bluetooth receiver device for
pairing.
b. Device's List
• Choose "Device's List" to enter into the paired device list, you
can disconnect or un-pair it, also can re-connect those devices
if it's in operating range.
• In device's list, choose the device's name and choose you
desired function "Disconnect" or "Connect/Unpair" as you
want. However, make sure that you have disconnected the
linking device before connect the new wanted device.
• Reconnect a pair Bluetooth device;
• Automatically connecting: every time when turn "On" the
Bluetooth
reconnect to the last connected device if the receiver device is
still in reconnect mode. However, some Bluetooth receiver
device may need to turn it "Off and On" again for reconnecting.
If not;
• Manual connecting: some Bluetooth receiver device may need
to reconnect manually; turn it power Off and On again for
reconnecting. Or;
• Choose "Device's List" again by using the
then choose the known device and choose "Connect" for
reconnecting.
"BT Now Playing"
transmission function, it
11
will automatically
/ and buttons,