Classification Key; Mortice Lock - Assa Abloy OneSystem Standard-Commercial Notice De Montage

DIN EN 12209
Tab. 1 :

Classification key

1 Test cycles: DIN
EN 12209
prescribes
200,000 test
cycles; actually
1,000,000 test
cycles were
successfully
passed
EN
34
Classification key
The properties of locks are described by the classification key according to DIN EN
12209:2003.

Mortice lock

The classification key for this lock is:
3 S 9 0 0
Tab. 1 explains the classification key.
Mortice lock Meaning according to DIN EN 12209:2003:
3 for use by the public, where there is little incentive to take
care and there is a high likelihood of misuse, such as in doors
in public buildings
S 200,000
9 Door mass up to 300 kg, maximum 15 N closing force
0 Not permitted for use on fire and smoke protection doors
0 No security requirement
C High corrosion resistance,
no temperature requirement
2 Low protective effect and no drilling resistance
H Mortice lock for use in a swing door
A Cylinder lock for manual locking
2 Lock for actuation of a door handle without holding spring
0 No requirement for key identification
C 2 H A 2 0
1 test cycles with a latch load of 50 N
Information