Cleaning And Maintenance; Technical Specifications - EuroLite LMCP Mode D'emploi

After you connected the device to the mains, it starts running. You can select the chaser patterns by
pressing the knob on the controller.
Attention: This device can be used with up to 4 panels. Max. distance between panels is 1.2 m.

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Controller:
Power supply:
Power consumption:
Panels/piece:
Power supply:
Power consumption:
Dimensions (LxHxW):
Weight:
Please note: Every information is subject to change without prior notice. 06.04.2005 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
230 V AC, 50 Hz ~
32 W
24 V AC, 50 Hz ~
5 W
305 x 305 x 45 cm
1.5 kg
14/24 51928740_V_1_1.DOC