Description And Indications Of The Led; Procedure For Using The Start-Up Aide - Absaar AB-MJS1000 Mode D'emploi

Operating instructions
4) DESCRIPTION AND INDICATIONS OF THE LEDS
Description
Indicator of the
and indication
charge status of
of the "Power"
the internal battery
power supply
button
Others
Torch LED
lighting
5) PROCEDURE FOR USING THE START-UP AID
• Ensure that the MJS-1000 is fully charged
• Connect the red clamp with the positive and the black clamp with negative pole of the battery
• Insert the jump leads into the outlet (9)
• Start the car (The attempt is only allowed to last 5 seconds, after each attempt you have to wait 60 seconds to cool down the
internal battery)
• Remove the jump leads out of the outlet (9)
• Disconnect the clamps from the battery
• Recharge the MJS-1000
Press the power supply button
the internal battery.
1- Click the "power" power supply button
2- Click again to activate the S.O.S. mode
3- Click again to activate the stroboscopic mode
4- Click again (or double click) to switch off the torch
(1)
The torch
(1)
below 50%.
, the LCD screen
(6)
cannot be switched on when charging the battery or when the capacity is
9
indicates the charge status of
(2)
for more than 3 seconds to light the torch
(6)
.
(1)
ABSAAR
(1)