Start; Quick Set Up - PURE Evoke Mio Manuel De L'utilisateur

Start

Quick set up > Controls at a glance > Rear connectors

Quick set up

Unclip the aerial and fully extend it (steps A and B).
Insert the jack of the supplied mains adapter into the socket on the rear of the radio (C).
Plug the mains adapter into the mains supply. (D)
Stereo Out
Aux In
6V DC
Select your language when prompted. Turn the tune dial to select (English/Francais/
Deutsch/Italiano) and push to confirm.
Tune
This will be followed by the Energy Saving mode screen.
By default, Energy saving is enabled but it can be switched off from within the menu.
(See page 12.)
With energy saving mode on, the power consumption in standby is less than 1 Watt.
Wait for your radio to complete an Autotune for all available digital stations. This takes
about a minute. When the Autotune is complete, a station will be selected.
PURE EVOKE Mio
2
B
A
ect Language. Choisissez
Deutsch
29 Now tuning...
1
Stereo Out
Aux In
D
C
6V DC
Tune
Energy saving
Enabled
BBC Radio 2
Talking to the people wh
6V DC