Model Designation; Specifications; Plug Configurations; Electrical Rating Chart - Hatco Flav-R-Fresh FDWD Série Manuel D'installation

English
Flav-R-Fresh Display Warmer

Plug Configurations

Units are supplied from the factory with an electrical cord and
plug installed. Plugs are supplied according to the applications.
WARNING
ELECTRIC SHOCK HAZARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage,
size, and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install the proper voltage and size electrical receptacle.
NOTE: Specification label is located on the ceiling sheet inside
of the unit. See label for serial number and verification
of unit electrical information.

Electrical Rating Chart

Model
FDWD-1, -1X, -2, -2X
(with humidity)
FDWD-1, -1X, -2, -2X
(no humidity)
FDWD-12-1X, -2X
(with humidity)
FDWD-12-1X, -2X
(no humidity)
Form No. FDWDM-1019
F D W D - 1 X
Designer
Voltage Watts
1360
120
1035
1360
120
1035

MODEL DESIGNATION

No Character = With Rack Motor
X = No Rack Motor
1 = One Door
2 = Two Doors
12-1 = Small Frame, One Door
12-2 = Small Frame, Two Doors
NOTE: Receptacle not supplied by Hatco.
Amps Plug Configuration
11.3
NEMA 5-15P
8.6
11.3
NEMA 5-15P
8.6
5

SPECIFICATIONS

NEMA 5-15P
Plug Configurations
Shipping Weight
90 lbs. (41 kg)
98 lbs. (44 kg)