Table Des Matières; Thanks For Choosing Toto; Common Tools Needed; Included Parts - Toto CST775 Manuel D'installation

Thanks for Choosing TOTO! .............................................................................................. 2
Common Tools Needed .................................................................................................... 2
Included Parts ..................................................................................................................... 2
Before Installation ............................................................................................................... 3
Installation Procedure ........................................................................................................ 3
Care and Cleaning ...............................................................................................................5
Maintenance Instructions ................................................................................................... 6
CEFIONTECT Cleaning Instructions ................................................................................ 7
®
Warranty ...............................................................................................................................8
The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and function
as a guiding principle. Congratulations on your choice.
• 10" adjustable wrench
• Carpenter's Level
• Hacksaw
• Tape Measure
ADDITIONAL ITEMS (NOT SUPPLIED BY TOTO):
• Bowl Wax Ring
• Closet Flange Mounting Bolts
(usually 2 T-bolts, 2 metal washers and 2 nuts)
• Water Supply Line
(typically 1/2" compression to 7/8" ballcock)
• Toilet Seat (TOTO SoftClose recommended)
Check to make sure you have all these parts from the package:
Bowl
Bolts (metal) - 2
Washers (rubber) -2
TABLE OF CONTENTS

THANKS FOR CHOOSING TOTO!

COMMON TOOLS NEEDED

INCLUDED PARTS

Washers (metal) - 4
Nuts (metal) -4
• Hand Pliers
• Flat Screwdriver
• Putty Knife
Tank
Caps (plastic) - 2
Base (plastic) - 2
2
Tank to Bowl Gasket
Fill Valve
Cone Washer -1
Fill Valve T-Nut -1