3M Bair Hugger 360 Mode D'emploi page 3

a 3M™ Bair Hugger™ Temperature
Monitoring Sensor Model 360
Product Description
The 3M Bair Hugger Temperature Monitoring Sensor Model 360 is a
non-invasive, non-sterile, single use, disposable temperature sensor that is
used exclusively with the 3M Bair Hugger Temperature Monitoring System
to measure core temperature of the patient. The sensor connects to the
Model 370 control unit through the sensor cable.
Indications for Use
Measure, monitor, and trend body temperature of adult and pediatric patients.
This product is intended to be used by trained medical professionals in a
clinical/surgical setting.
Patient Population and Settings
Adult and pediatric patients being treated in operating rooms, emergency
departments and other departments in the hospital setting where patient
temperature management is required.
Explanation of signal word consequences
Warning: Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
Caution: Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Notice: Indicate a situation which, if not avoided, could result in
property damage only.
WARNING: To reduce the risks associated with access to critical
patient information or equipment:
• The 3M™ Bair Hugger™ control unit is to be attached to other
equipment by authorized service personnel only.
• Do not re-install or re-locate the control unit.
WARNING: To reduce the risks associated with hazardous voltage, fire,
and thermal energy hazards:
• Use only with 3M™ Bair Hugger™ temperature monitoring system
components (sensors, cables, and power supply). Do not substitute
other devices for the control unit, sensor, cables, or power supply.
• Do not use the temperature monitoring system (sensor, control unit,
cables, or cords) in an MRI environment.
• Do not connect the monitor output of the device to a non-CF rated
monitor input.
WARNING: To reduce the risks associated with hazardous voltage and fire:
• Keep power supply visible and accessible at all times. The plug on the
power supply serves as the disconnect device. The power outlet shall
be as close as practical and shall be easily accessible.
• Use only the power supply specified for this product and certified for
the country of use.
• Use only a properly grounded power outlet; do not use extension cords
or multiple portable socket outlets.
• Do not allow the power supply to get wet.
1