Sun Microsystems SG-PCIE8SAS-EB-Z Guide D'installation page 36

3. Tapez analyze pour sélectionner le type de test.
FORMAT MENU:
disk- select a disk
type- select (define) a disk type
partition- select (define) a partition table
current- describe the current disk
format- format and analyze the disk
fdisk- run the fdisk program
repair- repair a defective sector
label- write label to the disk
analyze- surface analysis
defect- defect list management
backup- search for backup labels
verify- read and display labels
save- save new disk/partition definitions
inquiry- show vendor, product and revision
scsi- independent SCSI mode selects
cache- enable, disable or query SCSI disk cache
volname- set 8-character volume name
!<cmd>- execute <cmd>, then return
quit
format> analyze
4. Tapez read pour davantage définir le type de test, puis tapez y pour continuer.
ANALYZE MENU:
read- read only test (doesn't harm SunOS)
refresh- read then write (doesn't harm data)
test- pattern testing (doesn't harm data)
write- write then read (corrupts data)
compare- write, read, compare (corrupts data)
purge- write, read, write (corrupts data)
verify- write entire disk, then verify (corrupts data)
print- display data buffer
setup- set analysis parameters
config- show analysis parameters
!<cmd>- execute <cmd> , then return
quit
analyze> read
Ready to analyze (won't harm SunOS). This takes a long time,
but is interruptable with CTRL-C. Continue? y
pass 1
Total of 0 defective blocks repaired.
analyze>
14 Guide d'installation du HBA Sun StorageTek ExpressModule SAS • Mai 2008