Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Preparing the Panel
Remove plastic inserts from the slots on outer door as
indicated in Figure 23.
Measure from the top of the dishwasher to the base of
the bracket insertion, as shown in Figure 24. Record that
distance (A).
WARNING
Pinch Point Hazard!
Sliding parts. Keep fingers out of openings on
inner door!
14
Figure 23
Figure 24
Measure that same distance (A) on the door panel starting
at the top of the panel.
Use the template 11029812 to mark the center of the panel
and draw a vertical line down the center of the panel.
Use the template to draw a horizontal line across at A.
O
Using the template, mark the dots for I. See Figure 26.
10 - 24 lbs.
IMPORTANT NOTE:
•
The door panel should weigh between 5.5 and 18
pounds. If it is heavier, call Customer Service.
Figure 25
Figure 26
Figure 27
5.5 - 18.75 lbs.
10 - 24 lbs.
/
3
4
Publicité
Table des Matières
