Caframo Bora 748 Instructions De Fonctionnement page 3

Thank you for purchasing a Caframo Bora Fan
Grip handle to adjust
position of fan.
Push-button control
Unlock cam to adjust
vertical position.
Lock to hold fan in place.
Loosen stand-nut to
swivel fan position
from side to side.
Installation
Requires a 3 amp fused circuit. Use the two supplied machine screws to attach the fan base. Connect
the wire marked(+++) to a positive wire and connect the other wire to a negative ground wire.
Operating Instructions
The blade must be clear of any obstructions that would cause the blade to jam. Secure locking cam
in position before turning on. Depress button on the face of fan once to turn on. Depress button
again to adjust speed levels and to turn fan off.
Read and Save These Instructions
Warning:
• Do not position too close to any objects that may be drawn into the blades and stop the airflow
• Do not use outdoors
• Do not use on wet surfaces or immerse in water
• Never allow water to drip into motor housing
• Do not use if wires become frayed or brittle
• Do not use near fireplaces, furnaces, stoves or high temperature heat
• This appliance is not intended for use by persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the product
Care and Maintenance
The Bora requires very little maintenance. By following the instructions within this manual, the fan will
operate problem-free for years.
Tum power off to clean. A vacuum can be used to clear the fan of any dust build-up and a dry cloth may
be used to wipe the surface. Do not use gasoline, thinners or other harsh chemicals to clean fan.
Specifications (3 Speeds)
• 12Volt: 0. 1 5,0. 1 8and0. 2 7amps
3 speeds