General Safety Directions; Identification Of The Machine - Lega DV2 Guide D'instructions

1.0

GENERAL SAFETY DIRECTIONS

READ THIS MANUAL THROUGHOUT BEFORE USING THE MACHINE
This handbook forms an integral part of the machine and should be kept with it throughout its working life.
The machine includes dangerous electrically live and moving parts, which can cause serious damages to
persons or property in case of:
incorrect use
-
removal of guards or disconnection of safety devices
-
poor inspection and servicing
-
tampering with the electric system
-
These directions must be completed and updated according to applicable legal provisions and technical safety
standards.
The manufacturer may not be held responsible for failures, breaks or accidents resulting from incorrect use
of the machine or failure to follow the directions contained in this manual.

1.1 IDENTIFICATION OF THE MACHINE

Uncapping machine designed for cutting off the cappings on D.B. standard and Langstroth frames (also
referred to as super frames/supers) with or without Hoffmann spacer, using electrically heated serrated knives
on a chain conveyor.
1.2 SPECIFICATIONS
Uncapped frames
Total Absorption
Input voltage
Weight
Overall dimensions (WxDxH)
Costruzioni Apistiche – via Maestri del Lavoro 23 – 48018 Faenza
www.legaitaly.com - Tel 054626834 – Fax 054628279 – P.iva 00043230390
4350
DB
Nr / H 480
Kw 1800
V 220
Kg 49
860x660x60
mm
0
4351 4352
LG Layens
360 360
1800 1800
220 220
49 49
860x660x60 800x660x80
0 0
11 / 40