Unpack The Machine; Connect The Poles; Attach Machine To Shoulder Strap - GreenWorks Pro PH80B00 Manuel Opérateur

8

UNPACK THE MACHINE

WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
• If the parts have damage, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
8.1

CONNECT THE POLES

1
6
3
4
5
1. Loosen the knob (1) on the coupler (2).
2. Push in the release button (3) located on the left pole (4).
3. Align the release button with the positioning hole (5) with
the direction of the arrow (6) and slide the two poles
together.
4. Rotate the lower pole until the button locks into the
positioning hole.
WARNING
Periodically check the connections to ensure that they are
tightened securely.
2
English
8.2 ATTACH MACHINE TO
SHOULDER STRAP
1
2
1. Attach the carabiner to the carrying ring on the drive
tube.
2. Put on the shoulder strap.
3. Adjust the length of the strap so that the carabiner is
about a hand's width below your right hip.
7
2
1
1
2
EN