Operation - RIDGID WD45500 Mode D'emploi

Masquer les pouces Voir aussi pour WD45500:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ASSEMBLY
ATTACHING AND REMOVING VACUUM HOSE
(Fig. 3)
1. To Insert Hose: Insert the larger end of the
Expandable Hose (J) into the Vac Inlet Port.
Engage the Hose Locking Tab to the Lip of the
Vac Inlet Port. The Locking Tab should lock in
place.
2. To Remove the Hose from the Vac: Press the Hose
Locking Tab and pull the Expandable Hose out of the
Vac Inlet Port.

OPERATION

WARNING:
!
• Do not leave Vac running while unattended - you may fail to notice important signs indicating abnormal
operation such as loss of suction, debris/liquid exiting the exhaust, or abnormal motor noises.
Immediately stop using Vac if you notice these signs.
• Do not leave Vac plugged in when not in use.
• Do not continue running when float has cut off suction.
• Sparks inside the motor can ignite airborne flammables.
liquids or in areas with flammable gases, vapors, or explosive/airborne dust. Flammable liquids,
gases, and vapors include: lighter fluid, solvent-type cleaners, oil-based paints, gasoline, alcohol,
and aerosol sprays. Explosive dusts include: coal, magnesium, aluminum, grain, and gun powder.
• Do not vacuum up explosive dusts, flammable liquids, or hot ashes.
• Do not leave sawdust or rags with stain or polyurethane residue inside Vac. Empty drum after picking up
these potentially self-heating materials.
WARNING:
!
• Do not expose to rain or allow liquid to enter motor compartment. Store indoors.
• Do not handle plug, switch, or Vac with wet hands.
• Unplug Vac before servicing. If your Vac is not working as it should, has missing parts, has been
dropped, damaged, left outdoors, or dropped into water, return it to an authorized service center or call
customer service.
• When using an extension cord, use only outdoor-rated cords that are in good condition. Do not allow the
connection to come into contact with liquid.
CAUTION:
!
Vac/Blower for extended time or in a noisy area.
SP6734-4 4.5 gallon ESF.indb 6
SP6734-4 4.5 gallon ESF.indb 6
To reduce the risk of fire, explosion, or damage to Vac:
To reduce the risk of electric shock or injury:
To reduce the risk of hearing damage, wear ear protectors when using the
6
(B)
Do not operate Vac near flammable
Fig. 3
Vac Inlet Port
Hose
Locking
Tab
(J)
3/4/21 8:43 AM
3/4/21 8:43 AM

Publicité

Table des Matières
loading

Table des Matières