Remote Control Enclosures - Hatco Glo-Ray GRAM Série Manuel D'installation Et D'utilisation

INSTALLATION
Remote Control Enclosures — RMB Series
RMB Series remote control enclosures are available in various
configurations for use with strip heaters. Remote control
enclosures locate controls away from the heat of the unit,
increasing the life span of the controls. All models are built in
accordance with UL standards with toggle switch(es), indicator
light(s), and wiring.
Consult the factory for specific remote control enclosure for
your application and specific installation information.
NOTE: Refer to the OPTIONS AND ACCESSORIES section
for optional Infinite Remote Control Enclosure.
NOTE: RMB Series remote control enclosures require one
remote control enclosure per strip heater.
IMPORTANT NOTE:
Remote mounted enclosures must be installed in a cool, dry
location as far away from any heat zone as possible. Do not
mount enclosures directly on, under, or above unit. Do not
mount enclosures in direct contact with any heated surface or
near any steam generating equipment.
Remote Control Enclosure — RMB2 Series
RMB2 Series remote control enclosures allow multiple strip
heaters to be wired to and controlled by a single enclosure. The
total amp draw of all connected strip heaters cannot exceed the
rating of the remote control enclosure. Consult the factory for
information regarding the proper RMB2 Series remote control
enclosure for a specific application.
RMB2 Series Dimensions
Width Width
Models (A)
10-1/8"
RMB2-1R
(257 mm) (279 mm)
13-1/8"
RMB2-2R
(333 mm) (356 mm)
Top View
A
Front View
B
Dimensions — RMB2s
RMB2 Series Cutout Dimensions
Opening Cutout
Dimensions
Models (A)
4-3/4" 10-1/8"
RMB2-1R
(121 mm) (257 mm)
4-3/4" 13-1/8"
RMB2-2R
(121 mm) (333 mm)
7/16"
(11 mm)
3/8"
(9 mm)
Cutout Dimensions — RMB2s
14
English
Height Depth
(B) (C) (D)
11" 5-1/2" 4-1/4"
(140 mm) (109 mm)
14" 5-1/2" 4-1/4"
(140 mm) (109 mm)
Side View
D
C
Screw Hole
Dimensions
(B) (C) (D)
1-1/8" 2-1/2"
(29 mm) (64 mm)
1-1/8" 2-1/2"
(29 mm) (64 mm)
Silicone Sealant
A
B
E
Form No. GRAMM-1220
Height
(E)
4-5/8"
(116 mm)
4-5/8"
(116 mm)
E
(E)
10-7/16"
(265 mm)
13-7/16"
(341 mm)
C
D