shark SK460 Série Manuel Du Propriétaire page 11

fig. 2
fig. 1
IMPORTANT: Always make sure that
the Professional Steam & Spray
UNPLUGGED from the wall when not in use.
Never change or remove the cleaning pad when
the appliance is plugged into the wall. Use ONLY
Steam Energized Cleanser. The addition of other
™
chemicals or cleaning solutions may damage the
appliance, void the warranty and could be unsafe
for you and your family.
fig. 3
Mop is
™
fig. 4
ASSEMBLY
1 Insert the handle into the neck of the main body
of the Professional Steam & Spray
the mop handle and main body of the appliance
together until you hear it "click" into place.
(Fig. 1)
2 Insert the power cord plug into the power cord
receptacle on the unit. (Fig. 2)
3 Hold the power cord and wrap it around the cord
holders. (Fig. 3)
4 Remove the battery cover and insert the 4 AA
batteries. (Fig. 4) Replace the battery cover.
5 Place the Professional Steam & Spray
top of the cleaning pad. (Fig. 5)
If using the washable cleaning pad, ensure that the
Velcro side is facing up and the tab is in the back.
®
If using the Sanifiber
the logo side is facing up.
www.sharkclean.com
Cleaning Pad
fig. 5
Mop. Push
™
Mop unit on
™
disposable pad, ensure that
™
3